The SignalTEK 10G PRO for qualifying active and passive copper and fiber links over 10 Gbit/s determines the actual bandwidth available in the network and identifies bottlenecks to prove whether a cabling supports transmission up to 10 Gbit/s according to IEEE 802.3. With the help of automatic tests, the SignalTEK 10G provides a precise statement and evaluation. The compact tester features user-friendly operation, a 5" high-resolution touchscreen display and a sturdy housing. Built-in WiFi connectivity allows the SignalTEK 10G to connect directly to the free AnyWARE cloud management system. The SignalTEK 10G PRO supports the full range of copper/fiber/network and troubleshooting options such as transmission testing (network), 100 Mb/1Gb/10 Gb, application bandwidth testing (CCTV, video, web data), VLAN detection, multi-PING, event log (max. 72h), packet statistics for IP and MAC layers, IP contention, uptime test, packet error, jitter and delay, user defined bandwidth test, wiring diagram test, short circuits, open ends, split pair, length measurement and fault diagnosis with TDR technology. Bidirketional testing of network connections of copper and fiber optic cables according to IEEE 802.3 standards, skew (ns) and transmission tests 100/1000 Mbit/s /2.5/5/10 Gbit/s. Diagnosis of fault locations on the fiber, display of optical TX/RX level, detection of defective SFP modules, support of SFP/SFP+ (MM + SM). Maximum bandwidth test, hub blink, ping and trace route, port detection (LLDP/CDP/DCP), IPv4/IPv6 support and statistics. Verification of PoE installations up to 90 W (PoE++), testing of all PoE classes (0-8) and PoE types (af/at/bt), display of voltage and PoE wire pairs, tone generator for cable search (with compatible inductive receiver R180001). TeamViewer Live Support to assist with device diagnostics. Configurable autotest function for quick testing of common applications. PDF report of test results.