RJ-45 Cat.6 Plug with guide plate and colored boots

RJ-45 Cat.6 Plug with guide plate and colored boots

Item number: 20401.PACK

Application Areas: inner area

TRANSMISSION CHARACTERISTICS
- Cat.6, 250 MHz/ 1 GbE
APPLICABLE STANDARDS
- EIA/TIA 568 C.2 Cat.6
- ISO/IEC 11801 (2nd ed)
- EN 50173 2. Edition
Housing Nickel-plated brass
Contacts 30 µ gold plated
Cable Management AWG 24-27, stranded
Plug Tension =30 N
Insertion Cycle min. 750
Isolation resistance 500 M Ohm
Contact resistance = 20 m Ohm
Ampacaty 1,5 Amps
Operating Temperature -40° up to 70°C
Contact EIA/TIA A/B

Category: RJ45 modular plugs

Color
Quantity
Plug Color

starting from 3,60 €

including 19% VAT. , plus shipping

Available now!

Shielded Cat.6 or Cat.6A RJ45 connector with 30 µ gold plated contact surfaces and wire manager (8P8C), without cable strain relief. With a special wire separator, which aligns the wire pairs, a higher performance is ensured. This connector offers excellent performance and is suitable for high-speed transmissions from 1 GbE (Cat.6) up to 10 GbE (Cat.6A).

Average product review